| Quantity: | |
|---|---|
8200632270
TAXIM
The 8200632270 is a heated lambda oxygen sensor designed as a direct replacement for original equipment parts with OE numbers 8200632270 and 8200632220. This sensor monitors oxygen concentration in exhaust gases and transmits signals to the vehicle's electronic control unit (ECU) to adjust fuel injection volume, maintaining optimal air-fuel ratio. It is compatible with a range of French-made vehicles from Renault and Dacia, as well as their shared platform models, making it a standard inventory item for commercial procurement in the automotive aftermarket.
Item | Details |
Product Type | 4-wire heated oxygen sensor (Lambda Sensor) |
Compatible OE Numbers | 8200632270 / 8200632220 (interchangeable) |
Wire Harness Color | Orange |
Connector Type | Original equipment specification black connector |
Probe Design | Front-end perforated metal probe |
Compatible Engines | K7J, K7M, K4M, D4F |
Compatible Vehicles | Renault Logan, Renault/Lada Largus, Sandero and other shared platform models |
Installation Method | Direct plug-and-play |
This oxygen sensor incorporates design elements that align with original equipment standards, ensuring consistent performance in vehicle operation.
The 4-wire heating system reduces the time required for the sensor to reach operating temperature during cold starts. This allows the ECU to implement accurate air-fuel ratio control earlier in the driving cycle.
The orange wire harness is constructed from high-temperature resistant materials, suitable for the elevated temperature environment of the engine compartment. This material selection helps prevent premature cracking and degradation of the wiring insulation.
The black connector is manufactured to original equipment dimensions, providing a 1×1 match with the original vehicle wiring interface. This design ensures stable signal transmission and eliminates issues related to poor electrical contact.
The front-end perforated metal probe is installed directly in the exhaust pipe. This design allows for accurate measurement of oxygen levels in the exhaust gas stream, providing reliable data to the ECU for fuel injection adjustments.
This sensor is specifically calibrated for four widely used Renault engine series, each with distinct applications in the brand's vehicle lineup.
The K7J and K7M engines are 1.4L and 1.6L 8-valve single overhead camshaft units. These engines feature simple construction and low maintenance requirements, commonly found in early production Logan and Largus models.
The D4F is a 1.2L 16-valve small-displacement engine, primarily used in entry-level vehicles where fuel efficiency is a primary design consideration.
The K4M is a 1.6L 16-valve dual overhead camshaft engine, balancing power output and fuel consumption. It serves as one of the main powertrain options for Logan and Largus vehicles.
All components of this oxygen sensor, including connector pin configuration, wire harness length and mounting thread, match the original equipment specifications. This allows for direct installation without modification to the vehicle's wiring or exhaust system.
This sensor is designed for direct replacement of the original unit. No additional programming or modification to the vehicle's ECU is required after installation. The mounting thread matches the original exhaust port specification, and the connector plugs directly into the existing vehicle wiring harness. This plug-and-play design reduces installation time for service technicians and minimizes labor costs for commercial operations.
Yes, these two part numbers are fully interchangeable. They refer to the same oxygen sensor design and can be used as direct replacements for each other in all compatible vehicles.
No, this sensor does not require any programming or coding. It will communicate with the vehicle's ECU automatically once installed correctly.
Standard minimum order quantities are available for commercial procurement. Please contact our sales team for current pricing and bulk order discounts.
This product comes with a standard warranty period. Specific warranty terms and conditions are available upon request for commercial buyers.
For bulk order inquiries, current stock levels and custom packaging options for commercial operations, please contact our sales team directly. We provide tailored solutions to meet the inventory needs of automotive parts distributors and service centers worldwide.
